The colors on your screen do not always give an accurate representation. We highly recommend getting a free color card or sample prior to ordering.
- Product Code: 700355464464
- Availability: In Stock
Add up to 8 free color cards to your color cart (extras $0.25 ea.). Use the color cart checkout for color cards only: samples and all other products check out and ship separately.
Get up to 3 samples for $9.99 (extras $3.33 ea.) with free shipping. Color samples are sent in our Eggshell finish. Get a $9.99 samples rebate on your gallon or more order - limit one per customer.
Have you found the perfect color and selected your finish? Order your paint now!
ECOS wood conditioner is designed to prevent stain blotching and streaking, and to ensure an even stain color. Ideal for softwoods such as poplar, maple, pine, and cherry.
- ✔ Zero VOC1
- ✔ No Odor2
- ✔ Non-Toxic3
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
- 3Conforms to ASTMD-4236, specifically concerning oral toxicity, skin irritation and respiratory effects.
|Preparation||Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, grease, glue, flaking pieces, or contaminants. Repair any cracks, holes, or imperfections. Sand the wood in the direction of the grain to obtain a smooth uniform surface. First use a medium-grade sandpaper (#120) working your way to fine-grade sandpaper (#220). Do not use steel wool. Wipe clean with a damp cloth to remove all sanding dust, and let dry thoroughly before applying the stain. Always spot test on an inconspicuous area to ensure satisfactory results and color.|
|Application and Clean Up||Stir thoroughly before and during use to eliminate any settling. Do not shake. Do not thin. Do not apply in temperatures below 50oF. Dries to the touch in 30 to 60 minutes. High humidity and cool temperatures may result in longer dry and recoat times. Clean application tools with warm soapy water. Apply in the direction of the wood grain using a clean, lint-free cloth, high quality synthetic bristle brush, a foam brush, or lamb’s wool applicator (for floors). Maintain a wet edge. Allow to penetrate for one to three minutes. Once the conditioner has been applied go over the same section with a clean lint-free cloth to remove any excess, wiping in the direction of the grain with an even pressure. Do not allow conditioner that has not penetrated the wood to dry on the surface. After 15 to 30 minutes, lightly sand the surface with fine-grade sandpaper (220 grit) to smooth any raised grain, then remove all sanding dust. The surface is now ready for staining with ECOS Stain.|