Air Purifying Primer
The colors on your screen do not always give an accurate representation. We highly recommend getting a free color card or sample prior to ordering.
- Product Code: 700355463818
- Availability: In Stock
Add up to 8 free color cards to your color cart (extras $0.25 ea.). Use the color cart checkout for color cards only: samples and all other products check out and ship separately.
Get up to 3 samples for $9.99 (extras $3.33 ea.) with free shipping. Color samples are sent in our Eggshell finish. Get a $9.99 samples rebate on your gallon or more order - limit one per customer.
Have you found the perfect color and selected your finish? Order your paint now!
ECOS Interior Air Purifying primer is ideal for sealing interior or exterior medium density fiberboard (MDF), chipboard, particle board and plywood prior to painting. Adsorbs VOCs, including formaldehyde, before they escape into the air.
- ✔ Zero VOC1
- ✔ No Odor2
- ✔ Non-Toxic3
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
- 3Conforms to ASTMD-4236, specifically concerning oral toxicity, skin irritation and respiratory effects.
|Preparation||Surfaces should be clean, dry, sound, and free from dirt, dust, grease, and loose or flaking material. Clean stubborn areas with mild detergent. Rinse and dry thoroughly before painting. Soft or crumbly substrates should be pre-treated.|
|Application and Clean Up||Under most conditions thinning is not necessary. Stir gently before and during use. Intermix if using multiple containers to ensure color uniformity. Generally only requires one coat. Sand lightly between coats as this product may raise the grain of the wood. Normally dries to the touch in one hour. Allow four hours before sanding or painting. Can be applied using a good quality synthetic brush; or rolled using a shed resistant 1/4"-3/8" roller cover, or sprayed using an airless sprayer with 0.015” to 0.017” tip at 1600 to 1800 psi. Avoid applying below 50oF.|