Solid Color Concrete Sealer
Solid Color Concrete Sealer is a water based medium sheen, solvent free water repellent. Effective for use on concrete, masonry, brickwork and plaster, this stain will shed water and mud also protects against many stains. Recommended for application on walls, flooring, patios, walkways and concrete decking. Odorless, non-toxic, and VOC-free. Not recommended for garages.
- Product Code: 700355464334
- Availability: In Stock
Select up to 8 free color chips into your Color Cart, extras $0.25 ea. Color Cart choices ship separately from samples and orders.
Samples ship FREE. Get up to 3 samples for $9.99, rebated against a one gallon or more purchase, extras $3.33 ea. Limit one rebate per customer.
ECOS Solid Color Concrete Sealer is an acrylic based tinted, medium sheen, solvent-free water repellent, effective for use on concrete, masonry, brickwork, and plaster. ECOS Solid Color Concrete Stain will shed water and mud and protects against many stains. Recommended for application on walls, flooring, patios, walkways and concrete decking. Not recommended for garages.
- ✔ Zero VOC1
- ✔ No Odor2
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
|Preparation||Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, grease, glue, flaking pieces, sealers, curing and release compounds, or contaminants. Repair any cracks, holes, or imperfections where water can enter. Make sure that patching compounds will not show through the coating. New concrete must first cure for 28 days until the pH has stabilized. All concrete (new or old) must be etched sand/water blasted, or deep cleaned first – any residual liquid must be completely removed and the concrete allowed to dry thoroughly before sealing. Always spot test on an inconspicuous area to ensure satisfactory results and color.|
|Application and Clean Up||Stir thoroughly before and during use to eliminate any settling. Do not shake. Do not thin. Do not apply in temperatures below 50oF. Clean the area immediately prior to application. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 4 to 6 hours. High humidity and cool temperatures may result in longer dry and recoat times. Do not apply if rain is anticipated within 12 hours of application. Light foot traffic possible after one hour, heavy traffic after 72 hours. Clean application tools with warm soapy water. When working with more than one can, we recommend mixing together the contents of the cans to ensure color consistency. Apply with a high quality synthetic bristle brush, or roll with a shed resistant ½” – ¾” roller cover, or apply using an airless sprayer with a 0.013” to 0.015” tip at 1800 to 2500 psi. Cut in corners or edges with a bristle brush, then evenly apply with a roller over the remainder of the surface working in one direction. Do not overwork the product. Do not allow pooling. Maintain a wet edge to avoid lap marks. Two coats are recommended to achieve maximum performance and protection.|