Matte Paint for walls & ceilings is a self-priming, low sheen, hard wearing protective finish, ideal for interior surfaces in bedrooms, living rooms, and other spaces without high humidity. Odorless, non-toxic, and VOC-free.
- Product Code: 700355463801
- Availability: In Stock
Select up to 8 free color chips into your Color Cart, extras $0.25 ea. Color Cart choices ship separately from samples and orders.
Samples ship FREE. Get up to 3 samples for $9.99, rebated against a one gallon or more purchase, extras $3.33 ea.
ECOS Matte Paint is a low sheen, protective finish that dries to a hard, durable film. Ideal for interior walls and ceilings in living rooms, dining rooms, and bedrooms, the low light reflectance of our matte finish paint for walls and ceilings lets it mask some flaws or imperfections on many substrates. Our matte interior paint is not recommended for high moisture environments such as kitchens or bathrooms, where ECOS Eggshell Paint is preferred.
- ✔ Zero VOC1
- ✔ No Odor2
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
|Preparation||Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, or contaminants. Repair any cracks, holes, or imperfections. Sand glossy surfaces with fine grit sandpaper first to ensure good adhesion. Before painting, clean stubborn areas with mild detergent, and remove any loose, or peeling paint, then rinse and dry thoroughly before painting. ECOS Paint is self-priming on most properly prepared surfaces, but we recommend using one of our primers if painting over a higher gloss finish, a darker color, or applying an accent color.|
|Application and Clean Up||Stir well before use. If using multiple containers of the same color, intermix them all to ensure color uniformity. Can be applied using a high quality synthetic brush, rolled using a shed-resistant 3/8” to 1/2” roller cover, or sprayed using an airless sprayer with 0.015” to 0.017” tip at 1600 to 1800 psi. Do not apply in temperatures below 50oF. For best results, always apply two coats of paint. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Do not thin the paint. Clean up with warm soapy water.|