Air Purifying Paint
- Product Code: 700355463641
- Availability: In Stock
Select up to 8 free color cards into your Color Cart, extras $0.25 ea. Color Cart choices ship separately from samples and orders.
Samples ship FREE. Get up to 3 samples for $9.99, rebated against a one gallon or more purchase, extras $3.33 ea. Limit one rebate per customer.
ECOS Air Purifying Paint is a protective finish that dries to a hard, durable film. Ideal for exterior walls, furniture, and trim, and all interior rooms including kitchens and bathrooms. Atmosphere Purifying Paint adsorbs and neutralizes chemicals and pollutants, solvents and VOCs, for improved indoor air quality.
- ✔ Zero VOC1
- ✔ No Odor2
- ✔ Non-Toxic3
- 1Conforms to CDPH 01350 (VOC emissions test taken at 14 days).
- 2No traditional paint (polyurethane) odor, which can cause headaches, nausea, and respiratory issues.
- 3Conforms to ASTMD-4236, specifically concerning oral toxicity, skin irritation and respiratory effects.
|Preparation||Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, or contaminants. Repair any cracks, holes, or imperfections. Sand glossy surfaces with fine grit sandpaper first to ensure good adhesion. Before painting, clean stubborn areas with mild detergent, and remove any loose, or peeling paint, then rinse and dry thoroughly before painting. ECOS Paint is self-priming on most properly prepared surfaces, but we recommend using one of our primers if painting over a higher gloss finish, a darker color, or applying an accent color.|
|Application and Clean Up||Stir well before use. If using multiple containers of the same color, intermix them all to ensure color uniformity. Can be applied using a high quality synthetic brush, rolled using a shed-resistant 3/8” to 1/2” roller cover, or sprayed using an airless sprayer with 0.015” to 0.017” tip at 1600 to 1800 psi. Do not apply in temperatures below 50oF. For best results, always apply two coats of paint. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Do not thin the paint. Clean up with warm soapy water.|